Description
Soudaseal Mirror is a flexible, high strength mirror adhesive based on MS-Polymer®. Compatible with acetone resistant mirrors.
Characteristics
- Single component adhesive sealant
- High initial grab reducing the need for initial support
- High bond strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces (due to Soudaseal Mirror’s unique adhesion promotors)
- High performance mechanical properties
- Straigthforward application even in adverse conditions
- Excellent extrudability even at low temperatures
- Ecological advantages – free of isocyanates, silicone, solvents, halogens and acids
- Minimal health and safety considerations
- Resistant to many chemicals and withstands mould growth
- No staining of porous materials such as natural stone, blue stone, marble, granite
Applications
- Mirror bonding direct onto the back of the mirror (mirrors must be “acetone safe”)
- Bonding mirrors and mirror walls to all surfaces
- Sealing of joints in mirror walls.
- Applications where waterproof bonding is required
Directions for use
We recommend preliminary compatibility tests previous to application.
Application Instructions:
- Apply Mirobond with the enclosed triangular nozzles in vertical beads to the back of the mirror.
- Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.
- Always apply a bead at each side edge of the mirror
- See also “Remarks and Recommendations”
Application temperature: +5° until +35°
Cleaning: White Spirit or Surface Cleaner immediately after application and before curing.
Mechanically if cured
Repair with: Soudaseal Mirror
Remarks
- Due to the wide variety of types of mirrors, we strongly recommend preliminary compatibility tests.
- During the curing process the mirrors need to be supported until the adhesive has fully cured. The time required depends on the weight/size
of the mirror, the environmental situation (temperature, humidity) and the amount of product used.
- In order to avoid possible problems, the mirror manufacturers as well as Soudal recommend sufficient ventilation at the back of the mirror.
As a guideline, an opening of 3-4mm should be left between the surface and the mirror. This can be assured by the use of double sided mirror tape.
- We also recommend this minimal ventilation opening of 3-4mm to ensure correct curing of the adhesive/sealant. Full surface bonding is on the risk of the applicator.
- When mirrors with large dimensions are bonded, it’s highly recommended to use Soudaseal Mirror in combination with high quality double sided mirror tape.
- Mirrors that are fitted with a safety film at the back to avoid shattering must be pretreated with an adhesion promoter. SOUDAL SURFACE ACTIVATOR, when applied on this surface ensure the best bonding performance
of Soudaseal Mirror on this type of safety film. Without the use of SOUDAL SURFACE ACTIVATOR the adhesive bond might be insufficient with the risk of an unsafe situation.